|
Lamps and Lanterns CE Summary：Lamps and Lanterns CE test，CE certification requirements CE -Common Lamps and Lanterns： Lamps and Lanterns，a device that, by definition, allocates, transmits, or transmits light from one or more light sources，and wrap the parts necessary to support, fix, and protect the light source（But do not contain the light source itself），and the necessary circuit AIDS and facilities to connect them to the power supply。In the current market, Lamps and Lanterns have a wide range of products，can be divided by light source：incandescent lamp，fluorescent lamp，LED lamp etc. Can be divided according to installation way：moveable Lamps and Lanterns：desk lamp，Hanging wall lamp，floor lamp etc. Stationary type Lamps and Lanterns：ceiling lamp，wall lamp，embedded lamp，Track lamp etc. EU regulation or Directive for Lamps and Lanterns CE： LVD 2014/35/EU EMC 2014/30/EU Lamps and Lanterns CE standard LVD 2014/35/EU EN 60598-1: Luminaires — Part 1: General requirements and tests EN 60598-2-1 Luminaires — Part 2: Particular requirements — Section 1: Fixed general purpose luminaires EN 60598-2-2 Luminaires — Part 2-2: Particular requirements — Recessed luminaires EN 60598-2-3 Luminaires — Part 2-3: Particular requirements — Luminaires for road and street lighting EN 60598-2-4 Luminaires — Part 2: Particular requirements — Section 4: Portable general purpose luminaires EN 60598-2-5 Luminaires — Part 2-5: Particular requirements — Floodlights EN 60598-2-7 Luminaires — Part 2: Particular requirements — Section 7: Portable luminaires for garden use EN 60598-2-8 Luminaires — Part 2-8: Particular requirements — Handlamps EN 60598-2-9 Luminaires — Part 2: Particular requirements — Section 9: Photo and film luminaires (non-professional) EN 60598-2-10 Luminaires — Part 2-10: Particular requirements — Portable luminaires for children EN 60598-2-11 Luminaires — Part 2-11: Particular requirements — Aquarium luminaires EN 60598-2-12 Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights EN 60598-2-13 Luminaires — Part 2-13: Particular requirements — Ground recessed luminaires EN 60598-2-14 Luminaires — Part 2-14: Particular requirements — Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment EN 60598-2-17 Luminaires — Part 2: Particular requirements — Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) EN 60598-2-19 Luminaires — Part 2: Particular requirements — Section 19: Air-handling luminaires (safety requirements) EN 60598-2-20 Luminaires — Part 2-20: Particular requirements — Lighting chains EN 60598-2-21 Luminaires — Part 2-21: Particular requirements — Rope lights EN 60598-2-22 Luminaires — Part 2-22: Particular requirements — Luminaires for emergency lighting EN 60598-2-23 Luminaires — Part 2-23: Particular requirements — Extra low-voltage lighting systems for filament lamps EN 60598-2-24 Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures EN 60598-2-25 Luminaires — Part 2-25: Particular requirements — Luminaires for use in clinical areas of hospitals and health care buildings 。。。。。。 EMC 2014/30/EU EN 55015: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN 61547: Equipment for general lighting purposes - EMC immunity requirements EN 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) EN 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection Lamps and Lanterns CE test LVD 2014/35/EU l Durability test of CE label l Screw fastening test l Hanging test l Cable fixation experiment l Earth test l IP l Insulation resistance and dielectric strength l Leakage Current l Creepage distance and electrical clearance l Durability test l Thermal test l Prevent fire and electrical stain l Mechanical property test 。。。。。。 EMC 2014/30/EU EMI：RE（radiation，emission），CE(Conducted Emission），Harmonic，Flicker EMS：ESD，EFT，DIP，C，RS，Surge，PMS Lamps and Lanterns CE 1. Submit specification manual, drawing etc. to confirm the CE standard 2. Send sample test according to applicable CE standard requirement 3. Submit a full set of CE technical files 4. Notified body review all the reports and documents 5. Issue CE certificate 6. Labeled with CE mark, enter EU market CE Label-Lamps and Lanterns 1) CE mark is two semicircles, which can be scaled up or down according to the size of the package 2) The minimum size of CE mark shall not be less than 5mm 3) If the instruction does not specify a specific size, the two letters CE mark must have the same vertical height and must not be less than 5mm 4) The CE mark must be clearly and not easily obliterated 
>>Shanghai GOM Testing & Technical Co., Ltd.，as an authoritative third-party testing and certification agency，have experienced engineers provide professional technical support, and qualified laboratories provide you with the latest international standard testing >> 
Contact us: 021-34122669, 18018853504, info@cegaomeng.com
|