Geotextiles and geotextile-related products CE Certification EU Regulation of Geotextiles and geotextile-related products CE Construction products (CPR) Regulation (EU) No 305/2011 Geotextiles and geotextile-related products CE standards Different certification standards can be selected according to the specific use environment and use of geotextiles/geotextiles: EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) | EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways | EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures | EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems | EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) | EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams | EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals | EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures | EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals | EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects | EN 15381:2008 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
Please refer to Geotextiles and geotextile-related products CE Certification standards selection guide Geotextiles and geotextile-related products CE Test Item l Tensile Strength l Elongation at max. load l Resistance to static puncture l Dynamic perforation resistance l Characteristic opening size Water permeability normal to the plane l Durability l Dangerous substances Geotextiles and geotextile-related products CE certification system - As fluid or gas barriers - As protective layer - For drainage and/or filtration - For reinforcement | System 2+ | - As separation layer | System 4 |
Geotextiles and geotextile-related products CE-FPC 1 Factory production control scheme 1.1 General 1.2 Product design 1.3 Production 1.3.1 Raw or incoming materials 1.3.2 Production process 1.4 Finished products 1.4.1 tests on the finished product 1.4.2 Alternative tests 1.4.3 Equipment 1.5 Provision applicable to 1.2, 1.3, 1.4(to be used where appropriate) 1.5.1 Records 1.5.2 Assessment of results 1.5.3 Traceability 1.5.4 Corrective action for non-conforming materials and products 1.5.5 Personal 1.5.6 Quality management 2 Assessment of a factory production control (FPC) system FPC 2.1 General 2.2 Checklist 2.3 Test frequency Geotextiles and geotextile-related products CE Declaration of Performance(DOP) Please refer to: CPR Declaration of Performance (DOP) EN 13249: 2016 DOP sample Geotextiles and geotextile-related products CE mark/CE label requirements The CE marking symbol shall be in accordance with the general principles set out in Artile 30 of Regulation(EC)No 765/2008 and shall be affixed visibly, legibly an indelibly: - to the geotextile Or - to a label attached to it Where this is not possible or not warranted on account of the nature of the product, it shall be affixed: - to the packaging Or - to the accompanying documents The CE marking shall be followed by: - the last two digits of the year in which it was first affixed; - the name and the registered address of the manufacturer, or the identifying mark allowing identification of the name and address of the manufacturer easily and without any ambiguity; - the unique identification code of the product-type; - the reference number of the declaration of performance; - the level or class of the performance declared; - the date reference to the harmonized technical specification applied; - the identification number of the notified body; - the intended use as laid down in the harmonized technical specification applied.
|