Wood flooring

EN 14041:2004/AC:2006

Resilient, textile and laminate floor coverings - Essential characteristics

Wood flooring for interior flooring and wood flooring, excluding wood flooring products for visual and tactile enhancement

Fire resistance，Formaldehyde Emission，Emission of pentachlorophenol，breaking strength，

Slip resistance，

Thermal conductivity，Durability

System 1

System 3

System 4

Resilient, textile and laminate floor coverings

EN 14342:2013

Wood flooring and parquet - Characteristics, evaluation of conformity and marking

This document defines and specifies for wood and parquet flooring the relevant characteristics and the appropriate test methods to determine these characteristics for internal use as flooring. It also applies to wood veneer floor coverings.

Fire resistance，Formaldehyde Emission，Emission of pentachlorophenol，

Water tightness，

Slip resistance，

Thermal conductivity，Durability

System 3

System 4

Fibre-cement flat sheets

EN 12467:2012

Fibre-cement flat sheets - Product specification and test methods

Fibrous cement board for exterior wall and roof finish, excluding protective plate

Mechanical property，

Reaction to fire，

Hazardous release，

Water tightness，

Durability of warm water，

Soak, dry durability，

Freeze-thaw durability，

Hot rain durability

System 1

System 3

System 4

Ceramic tiles

EN 14411:2012

Ceramic tiles - Definitions, classification, characteristics, evaluation of conformity and marking

Common building tiles that are plastic by extrusion or dry pressing process, excluding decorative accessories, cut-out pieces or mosaics.

Reaction to fire，

Breaking strength，

Bending tensile strength，

Gliding into degrees，

Skid resistance，

Resistance to heat shocks，

Ability to resist frost thaw，

Adhesive strength，

Hazardous release

System 3

System 4

Decorative wall coverings-roll and panel form

EN 15102:2007+A1:2011

Decorative wall coverings - Roll and panel form

All forms of wallcovering products in roll and panel form as defined in EN 235 supplied for hanging onto internal walls, partitions or ceilings

Reaction to fire，

Formaldehyde Emission，

Heavy metals and certain elements，

Volatility of vinyl chloride monomers，

Sound absorption

Thermal resistance

System 1

System 3

System 4

Suspended ceilings

EN 13964:2014

Suspended ceilings - Requirements and test methods

This European Standard covers membranes, individual substructure components, substructure kits and suspended ceiling kits when these are placed on the market.

This European Standard does not cover the following:

? ceiling substructures and membrane component covered by other harmonised European Standards, for insitu formed ceilings, covered by other European technical specifications, for which it is the installer, not the component manufacturer, who takes responsibility for ensuring that the complete installed suspended ceiling

meets any regulatory requirements to which it is subject;

? stretched ceilings covered by EN 14716;

? ceilings in mobile buildings, caravans and other forms of transportation;

? characteristics needed for special applications, for which additional characteristics other than covered by this

European Standard would need to be complied with;

? ceilings subject to water penetration requirements;

? ceilings used externally where requirements other than covered by this scope would apply (tunnels, canopies,

petrol stations, arcades, open sports facilities, car parks etc.);

? heavy duty suspended ceilings or their supporting construction (e.g. ceilings that can be walked on);

? ceilings made from fire protective boards covered by ETAG 018-4.

Reaction to fire，

Fire resistance，

Flexural-tensile strength，

Weight capacity，

Hazardous release

System 1

System 3

System 4