Measurement, Control, and Laboratory Equipment CE
Summary：Measurement, Control, and Laboratory Equipment CE test and certification requirements
Measurement, Control, and Laboratory Equipment CE test and certification ensure product safety and meet international regulatory/standard requirements.
Common Measurement, Control, and Laboratory Equipments：
Electrical test and measurement equipment：This is equipment which by electromagnetic means tests, measures, indicates or records one or more electrical or physical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies for laboratory use, transducers, transmitters, etc.
Electrical industrial process-control equipment：This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables.
Electrical laboratory equipment：This is equipment which measures, indicates, monitors, inspects or analyses materials, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment.
EU Regulation or Directives for Measurement, Control, and Laboratory Equipment CE
EMC 2014/30/EU
LVD 2014/35/EU
Measurement, Control, and Laboratory Equipment CE standard
EMC Electromagnetic Compatibility
EN 61326: 2013
LVD Low Voltage Directive
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-020: Particular requirements for laboratory centrifuges
EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-020: Particular requirements for laboratory centrifuges
EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
EN 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment
EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
Measurement, Control, and Laboratory Equipment CE test
EMC Electromagnetic Compatibility
EMI：RE，CE，Harmonic，Flicker
EMS：ESD，EFT， DIP，CS， RS，Surge，PMS
LVD Low Voltage Directive
l Protection against electric shock
l Protection against mechanical HAZARDS
l Mechanical stress resistance
l Protection against the spread of fire
l Equipment temperature limits and resistance to heat
l Protection against HAZARDS from fluids
l Protection against radiation, including laser sources, and against sonic and ultrasonic pressure
。。。。。。
Measurement, Control, and Laboratory Equipment CE Process
1. Submit specification manual, drawing etc. to confirm the CE standard
2. Send sample test according to applicable CE standard requirement
3. Submit a full set of CE technical files
4. Notified body review all the reports and documents
5. Issue CE certificate
6. Labeled with CE mark, enter EU market
CE Label-Lamps and Lanterns
1) CE mark is two semicircles, which can be scaled up or down according to the size of the package
2) The minimum size of CE mark shall not be less than 5mm
3) If the instruction does not specify a specific size, the two letters CE mark must have the same vertical height and must not be less than 5mm
4) The CE mark must be clearly and not easily obliterated
>>Shanghai GOM Testing & Technical Co., Ltd.，as an authoritative third-party testing and certification agency，have experienced engineers provide professional technical support, and qualified laboratories provide you with the latest international standard testing >>
Contact us: 021-34122669, 18018853504, info@cegaomeng.com